SMA6J SERIES
FEATURES
- For surface mounted applications in order to optimize board space
- Halogen-Free
- RoHS compliant
- Typical maximum temperature coefficient ΔVBR=0.1%xVBR@25 ºCxΔT
- Low profile package
- Built-in strain relief
- Glass passivated junction
- Low inductance
- Excellent clamping capability
- Repetition Rate (duty cycle):0.01%
- Fast response time: typically less than 1.0ps from 0 Volts to V(BR)
- Typical IR less than 1uA above 12V
- High temperature soldering: 260°C/40 seconds at terminals
- Plastic package has Underwriters Laboratory Flammability 94V-O
- Matte Tin Lead-free plated
MECHANICAL DATA
Case: JEDEC DO214AB. Molded plastic over glass passivated junction
Terminal: Solderable per MIL-STD-750, Method 2026
Polarity: The band denotes TVS cathode
Standard Packaging:12mm tape (EIA STD RS-481)
Weight: 0.002 ounce, 0.061 gram
DEVICES FOR BIPOLAR APPLICATION
For Bidirectional use CA Suffix for types SMA6J5.0A thru types SM6J43A (e.g. SM6J5.0CA , SMA6J43CA)
Electrical characteristics apply in both directions
MAXIMUM RATINGS AND CHARACTERISTICS
Ratings at 25℃ ambient temperature unless otherwise specified.
Note:
(1)Non-repetitive current pulse , per Fig. 3 and derated above TA = 25℃ per Fig. 2 .
(2)Mounted on 5.0mm x 5.0mm (0.03mm thick) Copper Pads to each terminal
(3)8.3ms single half sine-wave , or equivalent square wave, Duty cycle = 4 pulses per minutes maximum.
(1)Non-repetitive current pulse , per Fig. 3 and derated above TA = 25℃ per Fig. 2 .
(2)Mounted on 5.0mm x 5.0mm (0.03mm thick) Copper Pads to each terminal
(3)8.3ms single half sine-wave , or equivalent square wave, Duty cycle = 4 pulses per minutes maximum.
•For bidirectional type having Vrwm of 10 volts and less, the IR limit is double.
RATINGS AND CHARACTERISTIC CURVES
Ratings and Characteristic Curves(TA=25℃ unless otherwise noted)
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR
Part Numbering System
Part Marking System
