產品名稱 : 1KSMB SERIES
產品描述

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR
VOLTAGE - 6.8 TO 180 Volts
1000 Watt Peak Pulse Power

FEATURES

  • Halogen-Free
  • RoHS compliant
  • Typical maximum temperature coefficient ΔVBR=0.1%xVBR@25 ºCxΔT
  • For surface mounted applications in order to optimize board space
  • Low profile package
  • Built-in strain relief
  • Glass passivated junction
  • Low inductance
  • Excellent clamping capability
  • Repetition Rate (duty cycle):0.01%
  • Fast response time: typically less than 1.0ps from 0 Volts to V(BR)
  • Typical IR less than 1μA above 12V.
  • High temperature soldering: 260°C/40 seconds at terminals
  • Plastic package has Underwriters Laboratory Flammability 94V-O
  • Matte Tin Lead-free plated

MECHANICAL DATA

Case: JEDEC DO214AB. Molded plastic over glass passivated junction

Terminal: Solderable per MIL-STD-750, Method 2026

Polarity: Color band denoted positive end (cathode) except Bidirectional

Standard Packaging: 12mm tape (EIA STD RS-481)

Weight: 0.003 ounce, 0.093 gram

DEVICES FOR BIPOLAR APPLICATION

For Bidirectional use Suffix CA for types 1KSMB6.8CA thru types 1KSMB180CA
Electrical characteristics apply in both directions

MAXIMUM RATINGS AND CHARACTERISTICS

Ratings at 25℃ ambient temperature unless otherwise specified.
RATINGSYMBOLVALUEUNITS
Peak Pulse Power Dissipation on 10/1000μs waveform (Note 1 ,FIG.1) PPPM Minimum 1000 Watts
Peak Pulse Power Dissipation on 10/10000μs waveform (Note 1,FIG.3) PPPM SEE TABLE 1 Amps
Peak Forward Surge Current,8.3ms Single Half Sine-Wave Superimposed on Rated Load,(JEDEC Method) (Note 3) IFSM 120 Amps
Operating junction and Storage Temperature Range TJ , TSTG -55 to + 150 °C
Note:
(1) Non-repetitive current pulse , per Fig. 3 and derated above TA = 25 °C per Fig. 2 .
(2) Mounted on 8.0mm x 8.0mm Copper Pads to each terminal  
(3)8.3ms single half sine-wave , or equivalent square wave, Duty cycle = 4 pulses per minutes maximum.
1KSMB
PART NUMBER
MARKING 
CODE
REVERSE STAND- OFF VOLTAGE VRWM(V)BREAKDOWN VOLTAGE
VBR(V) @IT
TEST CURRENT
IT (mA)
MAXIMUM CLAMPING VOLTAGE @Ipp Vc(V)PEAK
PULSE
CURRENT
Ipp (A)
REVERSE LEAKAGE @ VRWM IR(μA)
UNI- POLARBI-POLARUNIBIMINMAX
1KSMB 6.8A 1KSMB 6.8CA A10A N10A 5.80 6.45 7.14 10 10.5 95.2 900
1KSMB 7.5A 1KSMB 7.5CA A10B N10B 6.40 7.13 7.88 10 11.3 88.5 400
1KSMB 8.2A 1KSMB 8.2CA A10C N10C 7.02 7.79 8.61 10 12.1 82.6 180
1KSMB 9.1A 1KSMB 9.1CA A10D N10D 7.78 8.65 9.55 1 13.4 74.6 45
1KSMB 10A 1KSMB 10CA A10E N10E 8.55 9.50 10.50 1 14.5 69.0 8
1KSMB 11A 1KSMB 11CA A10F N10F 9.40 10.50 11.60 1 15.6 64.1 4
1KSMB 12A 1KSMB 12CA A10G N10G 10.20 11.40 12.60 1 16.7 59.9 1
1KSMB 13A 1KSMB 13CA A10H N10H 11.10 12.40 13.70 1 18.2 54.9 1
1KSMB 15A 1KSMB 15CA A10I N10I 12.80 14.30 15.80 1 21.2 47.2 1
1KSMB 16A 1KSMB 16CA A10J N10J 13.60 15.20 16.80 1 22.5 44.4 1
1KSMB 18A 1KSMB 18CA A10K N10K 15.30 17.10 18.90 1 25.5 39.2 1
1KSMB 20A 1KSMB 20CA A10L N10L 17.10 19.00 21.00 1 27.7 36.1 1
1KSMB 22A 1KSMB 22CA A10M N10M 18.80 20.90 23.10 1 30.6 32.7 1
1KSMB 24A 1KSMB 24CA A10N N10N 20.50 22.80 25.20 1 33.2 30.1 1
1KSMB 27A 1KSMB 27CA A10O N10O 23.10 25.70 28.40 1 37.5 26.7 1
1KSMB 30A 1KSMB 30CA A10P N10P 25.60 28.50 31.50 1 41.4 24.2 1
1KSMB 33A 1KSMB 33CA A10Q N10Q 28.20 31.40 34.70 1 45.7 21.9 1
1KSMB 36A 1KSMB 36CA A10R N10R 30.80 34.20 37.80 1 49.9 20.0 1
1KSMB 39A 1KSMB 39CA A10S N10S 33.30 37.10 41.00 1 53.9 18.6 1
1KSMB 43A 1KSMB 43CA A10T N10T 36.80 40.90 45.20 1 59.3 16.9 1
1KSMB 47A 1KSMB 47CA A10U N10U 40.20 44.70 49.40 1 64.8 15.4 1
1KSMB 51A 1KSMB 51CA A10V N10V 43.60 48.50 53.60 1 70.1 14.3 1
1KSMB 56A 1KSMB 56CA A10W N10W 47.80 53.20 58.80 1 77.0 13.0 1
1KSMB 62A 1KSMB 62CA A10X N10X 53.00 58.90 65.10 1 85.0 11.8 1
1KSMB 68A 1KSMB 68CA A10Y N10Y 58.10 64.60 71.40 1 92.0 10.9 1
1KSMB 75A 1KSMB 75CA A10Z N10Z 64.10 71.30 78.80 1 103.0 9.7 1
1KSMB 82A 1KSMB 82CA B10A O10A 70.10 77.90 86.10 1 113.0 8.8 1
1KSMB 91A 1KSMB 91CA B10B O10B 77.80 86.50 95.50 1 125.0 8.0 1
1KSMB 100A 1KSMB 100CA B10C O10C 85.50 95.00 105.00 1 137.0 7.3 1
1KSMB 110A 1KSMB 110CA B10D O10D 94.00 105.00 116.00 1 152.0 6.6 1
1KSMB 120A 1KSMB 120CA B10E O10E 102.00 114.00 126.00 1 165.0 6.1 1
1KSMB 130A 1KSMB 130CA B10F O10F 111.00 124.00 137.00 1 179.0 5.6 1
1KSMB 150A 1KSMB 150CA B10G O10G 128.00 143.00 158.00 1 207.0 4.8 1
1KSMB 160A 1KSMB 160CA B10H O10H 136.00 152.00 168.00 1 219.0 4.6 1
1KSMB 170A 1KSMB 170CA B10I O10I 144.50 162.00 179.00 1 234.0 4.3 1
1KSMB 180A 1KSMB 180CA B10J O10J 153.00 171.00 189.00 1 246.0 4.1 1
• For bidirectional type having Vrwm of 10 volts and less, the IR limit is double.

RATINGS AND CHARACTERISTIC CURVES

Ratings and Characteristic Curves(TA=25℃ unless otherwise noted)

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

Part Numbering System
Part Marking System

Packaging

Part numberComponent PackageQuantityPackaging OptionPackaging Specification
1KSMBxxxXX DO-214AA 3000 Tape & Reel - 16mm/13" tape EIA STD RS-481
1KSMBxxxXX DO-214AA 500 Tape & Reel - 16mm/7" tape EIA STD RS-481